Soft robots are powerful tools for manipulating delicate objects, yet their adoption is hindered by two gaps: the lack of integrated tactile sensing and sensor signal distortion caused by actuator deformations. This paper addresses these challenges by introducing the SoftMag actuator: a magnetic tactile-sensorized soft actuator. Unlike systems relying on attached sensors or treating sensing and actuation separately, SoftMag unifies them through a shared architecture while confronting the mechanical parasitic effect, where deformations corrupt tactile signals. A multiphysics simulation framework models this coupling, and a neural-network-based decoupling strategy removes the parasitic component, restoring sensing fidelity. Experiments including indentation, quasi-static and step actuation, and fatigue tests validate the actuator's performance and decoupling effectiveness. Building upon this foundation, the system is extended into a two-finger SoftMag gripper, where a multi-task neural network enables real-time prediction of tri-axial contact forces and position. Furthermore, a probing-based strategy estimates object firmness during grasping. Validation on apricots shows a strong correlation (Pearson r over 0.8) between gripper-estimated firmness and reference measurements, confirming the system's capability for non-destructive quality assessment. Results demonstrate that combining integrated magnetic sensing, learning-based correction, and real-time inference enables a soft robotic platform that adapts its grasp and quantifies material properties. The framework offers an approach for advancing sensorized soft actuators toward intelligent, material-aware robotics.

Abstract-- Soft robotics gripper have shown great promise in handling fragile and geometrically complex objects. However, most existing solutions rely on bulky actuators, complex control strategies, or advanced tactile sensing to achieve stable and reliable grasping performance. In this work, we present a multi-finger hybrid gripper featuring passively deformable origami modules that generate constant force and torque output. Each finger composed of parallel origami modules is driven by a 1-DoF actuator mechanism, enabling passive shape adaptability and stable grasping force without active sensing or feedback control. More importantly, we demonstrate an interesting capability in simultaneous multi-object grasping, which allows stacked objects of varied shape and size to be picked, transported and placed independently at different states, significantly improving manipulation efficiency compared to single-object grasping. As robotics continues to expand beyond industrial automation into unstructured environments and daily tasks, there is a growing demand for efficient grippers that can handle objects with varying geometries and stiffness, and even multi-object grasping [1].

Abstract--Biological systems, such as the octopus, exhibit masterful cross-scale manipulation by adaptively reconfiguring their entire form, a capability that remains elusive in robotics. Conventional soft grippers, while compliant, are mostly constrained by a fixed global morphology, and prior shape-morphing efforts have been largely confined to localized deformations, failing to replicate this biological dexterity. Inspired by this natural exemplar, we introduce the paradigm of collaborative, whole-body proprioceptive morphing, realized in a modular soft gripper architecture. Our design is a distributed network of modular self-sensing pneumatic actuators that enables the gripper to intelligently reconfigure its entire topology, achieving multiple morphing states that are controllable to form diverse polygonal shapes. By integrating rich proprioceptive feedback from embedded sensors, our system can seamlessly transition from a precise pinch to a large envelope grasp. We experimentally demonstrate that this approach expands the grasping envelope and enhances generalization across diverse object geometries (standard and irregular) and scales (up to 10), while also unlocking novel manipulation modalities such as multi-object and internal hook grasping. This work presents a low-cost, easy-to-fabricate, and scalable framework that fuses distributed actuation with integrated sensing, offering a new pathway toward achieving biological levels of dexterity in robotic manipulation. This remarkable adaptability stems from their ability to perform whole-body proprioceptive morphing, i.e., a capability fundamentally absent in conventional robotics [1]-[4].

Abstract-- Fruit harvesting remains predominantly a labor-intensive process, motivating the development of research for robotic grippers. Conventional rigid or vacuum-driven grippers require complex mechanical design or high energy consumption. Current enveloping-based fruit harvesting grippers lack adaptability to fruits of different sizes. This paper introduces a drawstring-inspired, cable-driven soft gripper for versatile and gentle fruit harvesting. The design employs 3D-printed Thermoplastic Polyurethane (TPU) pockets with integrated steel wires that constrict around the fruit when actuated, distributing pressure uniformly to minimize bruising and allow versatility to fruits of varying sizes. The lightweight structure, which requires few components, reduces mechanical complexity and cost compared to other grippers. Actuation is achieved through servo-driven cable control, while motor feedback provides autonomous grip adjustment with tunable grip strength. Experimental validation shows that, for tomatoes within the gripper's effective size range, harvesting was achieved with a 0% immediate damage rate and a bruising rate of less than 9% after five days, reinforcing the gripper's suitability for fruit harvesting. While there is ongoing research and development towards fruit harvesting solutions [1] [2], hand-picking remains the dominant method due to its delicacy for soft fruits [3].

For robot manipulation, both the controller and end-effector design are crucial. Soft grippers are generalizable by deforming to different geometries, but designing such a gripper and finding its grasp pose remains challenging. In this paper, we propose a co-design framework that generates an optimized soft gripper's block-wise stiffness distribution and its grasping pose, using a neural physics model trained in simulation. We derived a uniform-pressure tendon model for a flexure-based soft finger, then generated a diverse dataset by randomizing both gripper pose and design parameters. A neural network is trained to approximate this forward simulation, yielding a fast, differentiable surrogate. We embed that surrogate in an end-to-end optimization loop to optimize the ideal stiffness configuration and best grasp pose. Finally, we 3D-print the optimized grippers of various stiffness by changing the structural parameters. We demonstrate that our co-designed grippers significantly outperform baseline designs in both simulation and hardware experiments. More info: http://yswhynot.github.io/codesign-soft/

Shape-morphing robots have shown benefits in industrial grasping. We propose form-flexible grippers for adaptive grasping. The design is based on the hybrid jamming and suction mechanism, which deforms to handle objects that vary significantly in size from the aperture, including both larger and smaller parts. Compared with traditional grippers, the gripper achieves self-closing to form an airtight seal. Under a vacuum, a wide range of grasping is realized through the passive morphing mechanism at the interface that harmonizes pressure and flow rate. This hybrid gripper showcases the capability to securely grasp an egg, as small as 54.5% of its aperture, while achieving a maximum load-to-mass ratio of 94.3.

-- In this project, we focus on human-robot interaction in caregiving scenarios like bathing, where physical contact is inevitable and necessary for proper task execution because force must be applied to the skin. Using finite element analysis, we designed a 3D-printed gripper combining positive and negative pressure for secure yet compliant handling. Preliminary tests showed it exerted a lower, more uniform pressure profile than a standard rigid gripper . In a user study, participants' trust in robots significantly increased after they experienced a brief bathing demonstration performed by a robotic arm equipped with the soft gripper . These results suggest that soft robotics can enhance perceived safety and acceptance in intimate caregiving scenarios.

-- Soft robotic grippers gently and safely manipulate delicate objects due to their inherent adaptability and softness. Limited by insufficient stiffness and imprecise force control, conventional soft grippers are not suitable for applications that require stable grasping force. In this work, we propose a soft gripper that utilizes an origami-inspired structure to achieve tunable constant force output over a wide strain range. The geometry of each taper panel is established to provide necessary parameters such as protrusion distance, taper angle, and crease thickness required for 3D modeling and FEA analysis. Simulations and experiments show that by optimizing these parameters, our design can achieve a tunable constant force output. Moreover, the origami-inspired soft gripper dynamically adapts to different shapes while preventing excessive forces, with potential applications in logistics, manufacturing, and other industrial settings that require stable and adaptive operations.

This study presents an innovative offset-trimmed helicoids (OTH) structure, featuring a tunable deformation center that emulates the flexibility of human fingers. This design significantly reduces the actuation force needed for larger elastic deformations, particularly when dealing with harder materials like thermoplastic polyurethane (TPU). The incorporation of two helically routed tendons within the finger enables both in-plane bending and lateral out-of-plane transitions, effectively expanding its workspace and allowing for variable curvature along its length. Compliance analysis indicates that the compliance at the fingertip can be fine-tuned by adjusting the mounting placement of the fingers. This customization enhances the gripper's adaptability to a diverse range of objects. By leveraging TPU's substantial elastic energy storage capacity, the gripper is capable of dynamically rotating objects at high speeds, achieving approximately 60 in just 15 milliseconds. The three-finger gripper, with its high dexterity across six degrees of freedom, has demonstrated the capability to successfully perform intricate tasks. One such example is the adept spinning of a rod within the gripper's grasp.

Soft robots, made from compliant materials, exhibit complex dynamics due to their flexibility and high degrees of freedom. Controlling soft robots presents significant challenges, particularly underactuation, where the number of inputs is fewer than the degrees of freedom. This research aims to develop a digital twin for multi-fingered soft grippers to advance the development of underactuation algorithms. The digital twin is designed to capture key effects observed in soft robots, such as nonlinearity, hysteresis, uncertainty, and time-varying phenomena, ensuring it closely replicates the behavior of a real-world soft gripper. Uncertainty is simulated using the Monte Carlo method. With the digital twin, a Q-learning algorithm is preliminarily applied to identify the optimal motion speed that minimizes uncertainty caused by the soft robots. Underactuated motions are successfully simulated within this environment. This digital twin paves the way for advanced machine learning algorithm training.